Panasonic KX-TDA50 Feature Manual page 116

6.1.4 Flexible Numbering/Fixed Numbering
Feature
Extension Dial Lock set/cancel
Time Service Switch
Remote Extension Dial Lock off
Remote Extension Dial Lock on
NDSS Monitor Release (Centralized
BLF Monitor Cancel)
Extension Feature Clear
Extension Personal Identification
Number (PIN) set/cancel
Dial Information (CTI)
Other PBX Extension Number (TIE)
01–16
Quick Dialing 1–80
*1 It is possible to register Quick Dialing numbers that overlap with other registered numbers. This is used for the Automatic
Rerouting of VoIP Calls To Public CO Line feature.
2.
Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customized for
easy use. The numbers should be one digit (0-9, " ", or "#") and must not conflict. For a list of the default
settings, refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Call Waiting/DND Override
Executive Busy Override
Message Waiting set
Call Monitor
Automatic Callback Busy
Alternate Calling—Ring/Voice
*1
To use Call Waiting/DND Override, both "1" and "2" are available by default.
3.
Fixed Numbering (available while dialing or talking)
Features which are available while dialing or talking have fixed numbers, as shown in the following table:
116 Feature Manual
*1
Feature
Default
Pattern 1
(with )
KX-TDA50/ KX-TDA600
KX-TDA100/
KX-TDA200
77
780
782
783
784
790
799
None
None
None
Pattern 2
(without
77 77
780 780
782 782
783 783
784 784
790 790
799 799
None None
None None
None None
Default
1 or 2
*1
3
4
5
6
Document Version 2010-11
)