Number in
the Pattern
(9)
(10)
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR
[Programmable Items]
Item
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Document Version 2010-11
Data
CD (Condition
Shows other call information using the following codes:
Code)
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (® 13.1.6 PC
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost
Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Controls whether outgoing CO line calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
13.1 [11-1] Main—SMDR—
[804] SMDR Outgoing Call Printing
Controls whether incoming CO line calls are shown.
13.1 [11-1] Main—SMDR—
[805] SMDR Incoming Call Printing
Controls whether outgoing intercom calls are recorded.
13.1 [11-1] Main—SMDR—
Controls whether the Log-in/Log-out status of extensions is
recorded.
13.1 [11-1] Main—SMDR—
Log-out
Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 1.1.3 ARS (Automatic
Route Selection))
13.1 [11-1] Main—SMDR Options—
Dial
16.1.1 SMDR (Station Message Detail Recording)
Description
Description
Print Information—Outgoing Call
Print Information—Incoming Call
Print Information—Intercom Call
Print Information—Log-in /
SMDR Options—ARS
Feature Manual
289