Download  Print this page

Voice Mail Dpt (digital) Integration - Panasonic KX-TDA50 Feature Manual

Hide thumbs

Advertisement

19.1.4 Voice Mail DPT (Digital) Integration

5.18 [3-7-1] VM(DPT) Group—System Settings
5.19 [3-7-2] VM(DPT) Group—Unit Settings
5.21 [3-8-1] VM(DTMF) Group—System Settings
5.22 [3-8-2] VM(DTMF) Group—Group Settings
PT Programming Manual References
[601] Terminal Device Assignment
[660] VM Group Floating Extension Number
Feature Manual References
19.1.4 Voice Mail DPT (Digital) Integration
19.1.5 Voice Mail DTMF Integration
21.1 Capacity of System Resources
19.1.4 Voice Mail DPT (Digital) Integration
Description
A Panasonic VPS that supports DPT (Digital) Integration (e.g., the KX-TVP200) can be connected to this PBX
in a tightly integrated fashion.
DPT (Digital) Integration features can be used when the VPS is connected through DPT ports of the PBX.
Feature Explanation
1.
Automatic Configuration—Quick Setup
The PBX informs the VPS of its extension numbers and the floating extension numbers of the incoming
call distribution groups so that the VPS can create mailboxes with this data automatically.
2.
FWD to a Mailbox of the VPS
If an extension user sets FWD to the VPS, incoming calls are forwarded to the VPS. (® 6.1.6 FWD (Call
Forwarding)) The PBX sends a mailbox number of the forwarding extension to the VPS. Therefore the
caller can leave a message in the mailbox of the extension without knowing the mailbox number.
3.
Intercept Routing to a Mailbox of the VPS
If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be redirected to
the VPS (® 9.1.11 Intercept Routing). If the "Intercept to Mailbox" setting is enabled through system
programming, the PBX sends the mailbox number of the intercepted extension to the VPS. Therefore the
caller can leave a message in the mailbox of the extension without knowing the mailbox number.
5.18 [3-7-1] VM(DPT) Group—System Settings—
4.
Transferring to a Mailbox of the VPS
An extension user can transfer a call to a mailbox of the VPS so that the caller can leave a message in the
mailbox of the desired extension. (® 3.1.8 Call Transfer) The extension user should use the Voice Mail
(VM) Transfer button, when transferring a call to the mailbox of the VPS. When the extension user presses
this button and enters the desired extension number, the PBX will transfer the call to the VM group and
dial the mailbox number of the desired extension number with the required command (after the VPS
answers the call). Therefore the caller can leave a message without knowing the mailbox number.
5.
Transfer Recall to a Mailbox of the VPS
If a call is transferred to an extension via the Automated Attendant (AA) service of the VPS and the call is
not answered within a preprogrammed Transfer Recall time, the PBX sends the mailbox number of the
transfer destination extension to the VPS. Therefore the caller can leave a message in the mailbox of the
extension without knowing the mailbox number. The "Transfer Recall to Mailbox" setting should
be enabled through system programming to use this feature.
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
334
Feature Manual
Intercept to Mailbox
Recall—Transfer Recall
Document Version 2010-11

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-TDA50

This manual is also suitable for:

Kx-tda600Kx-tda100Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: