Download  Print this page

Emergency Call; Executive Busy Override - Panasonic KX-TDA50 Feature Manual

Hide thumbs


5.1.2 Emergency Call

An extension user can dial preprogrammed emergency numbers after seizing a CO line regardless of the
restrictions imposed on the extension.
A specified number of emergency numbers can be stored.
Emergency numbers may be called, regardless of Toll Restriction (TRS) level (® 17.1.6 TRS (Toll
Restriction)), even when:
in Account Code—Forced mode (® 1.1.2 Account Code Entry)
in Extension Dial Lock (® 5.1.4 Extension Dial Lock)
CLIP Number Notification (KX-TDA100/KX-TDA200/KX-TDA600 only)
When dialing an emergency number, the preassigned CLIP number for the extension will be sent as a
location identification number. (® 3.1.13 CLIP (Calling Line Identification Presentation))
The CLIP number assigned to the extension will be sent regardless of the settings such as CLIR or CLIP
number assigned to an ISDN port to be used. This feature is only available when using a PRI line, with
E911-compatible services.
PC Programming Manual References
9.4 [7-4] Emergency Dial
PT Programming Manual References
[304] Emergency Number
Feature Manual References
21.1 Capacity of System Resources

5.1.3 Executive Busy Override

Allows an extension user to interrupt an existing call to establish a three-party conference call.
Executive Busy Override Deny:
It is possible for extension users to prevent their calls from being interrupted by another extension user.
One-touch Executive Busy Override (KX-TDA50 only)
Extension users can perform Executive Busy Override by simply pushing the S-CO button of a call in progress,
without the need to dial a feature number.
Class of Service (COS) programming determines the extension users who can use Executive Busy
Override and set Executive Busy Override Deny.
This feature will not function when the busy extension:
Document Version 2010-11
5.1.3 Executive Busy Override
Feature Manual


Table of Contents

   Related Manuals for Panasonic KX-TDA50

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: