Download  Print this page


12.1.5 Operator Features

One-touch Dialing Button
Any flexible button can be customized as a One-touch Dialing button.
Full One-touch Dialing
There is no need to go off-hook before pressing a One-touch Dialing button.
PC Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Option 6—
6.5 [4-1-4] Wired Extension—Flexible Button
Dial (for One-touch)
6.10 [4-2-1] Portable Station—Extension Settings—Option 6—
6.13 [4-2-3] Portable Station—Flexible Button
Dial (for One-touch)
6.18 [4-3] DSS Console
Dial (for One-touch)
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.47 One-touch Dialing
12.1.5 Operator Features
Any extension or Incoming Call Distribution (ICD) group can be designated as an operator.
This PBX supports the following types of operators:
PBX operator
Tenant operator
Operator Call:
An extension user can call an operator by dialing the preprogrammed Operator Call feature number. The
destination of the Operator Call depends on the following:
If the Tenant Service is not in use:
The call is directed to the PBX operator according to the corresponding time mode.
If the Tenant Service is in use:
Feature Manual
An extension or ICD group can be assigned as a PBX operator for each
time mode (day/lunch/break/night).
An extension or incoming call distribution group can be assigned as a
tenant operator. The tenant operator may be the extension or ICD group
of another tenant.
[Example] Extension 110 in tenant 1 is the tenant operator of tenant 3.
Flexible Button Programming Mode
Flexible Button Programming Mode
Document Version 2010-11


Table of Contents

   Related Manuals for Panasonic KX-TDA50

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: