Download  Print this page

Local Alarm Information - Panasonic KX-TDA50 Feature Manual

Hide thumbs


10.1.4 Local Alarm Information

Prime Line
Line Preference Override
A user can override the preset Line Preference temporarily by pressing the desired Line Access button or
a Memory Dialing button, such as One-touch Dialing, before going off-hook.
To select Idle Line Preference, the trunk groups available to the extension should be programmed on a
COS basis. Also trunk groups available for Idle Line Access should be assigned.
PC Programming Manual References
4.12 [2-7-2] Class of Service—External Call Block
5.2 [3-1-2] Trunk Group—Local Access Priority
6.1 [4-1-1] Wired Extension—Extension Settings—Option 4—
6.10 [4-2-1] Portable Station—Extension Settings—Option 4—
PT Programming Manual References
[103] Idle Line Access (Local Access)
[500] Trunk Group Number
Operating Manual References
3.1.2 Personal Programming
10.1.4 Local Alarm Information
When the PBX detects an error, the System Alarm button on the proprietary telephone (PT) of an extension
which is allowed to use this feature through system programming (a maximum of two extensions per PBX),
lights red. Pressing the button will show the error number on the display. If multiple errors occur, the error
number will be displayed in order of highest priority to lowest. The System Alarm button light turns off
automatically after all error numbers have been displayed.
For details about the errors and their solutions, refer to the Installation Manual.
Feature Manual
When an extension user goes off-hook, the preset line is selected
automatically. A prime line can be selected from the Line Access
buttons: S-CO, G-CO, L-CO, ICD Group.
Outgoing Preferred Line
Outgoing Preferred Line
Document Version 2010-11


Table of Contents

   Related Manuals for Panasonic KX-TDA50

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: