About Wireless Communications; Configure Wireless Communications From The Web Page - Intermec PM23c User Manual

About Wireless Communications

PM23c, PM43, and PM43c Mid-Range Printer User Manual
The printer supports wireless communications when the optional
Wi-Fi/Bluetooth module is installed.
You can configure wireless communications:
• from the printer web page.
• from the printer Main menu if your printer has full touch display
front panel.
By default, the printer supports DHCP networks.
Note: If you are not using a DHCP network, you need to configure
Wi-Fi settings by using Intermec PrintSet through a USB connection
to the printer, by sending commands through a serial connection, or
by using the wizards and settings menus on a full touch printer.
Configure Wireless Communications from the Web
Page
Use this procedure to configure wireless communications from the
printer web page.
Note: To configure the printer from the web page, the printer must be
turned on and connected to your Wi-Fi or Ethernet network.
1 Open a web browser on your PC.
2 In the address bar, type the IP address of your printer and press
Enter. The printer web page appears.
3 Click Login. The Login page appears.
4 Type your Username and Password and then click Login. The
default value for Username is admin and the default value for
Password is pass.
5 Click the Configure tab. The Configuration Summary page
appears.
Chapter 3 — Connect the Printer
51