Adjust the Printhead Pressure
PM23c, PM43, and PM43c Mid-Range Printer User Manual
3 Turn the printhead lift lever counterclockwise to raise the
printhead.
4 Press down on the blue part of the printhead balance bar and move
it:
•
outward for wider media.
inward for narrower media.
•
5 Close the printhead and load the ribbon.
6 Test and readjust the printhead balance if necessary.
7 Close the media cover.
You may need to adjust the printhead pressure on the printer if:
•
you are using thicker or thinner media than previously.
•
your labels are printing ligher on one side than the other.
•
your thermal transfer ribbon starts to crease.
Do not use a higher printhead pressure than necessary. It may increase
the wear on the printhead and shorten its life.
Chapter 6 — Maintain the Printer
109