About Zsim; About Dsim; About Smart Printing; How To Set The Printer Command Language - Intermec PM23c User Manual

Chapter 1 — About the Printer

About ZSim

About DSim

About Smart Printing

How to Set the Printer Command Language

18
ZSim (ZPL command language simulator) interprets Zebra™
programs (ZPL II or later) without requiring any host programming
changes. If you are sending ZPL label files to the printer, select ZSim as
your printer command language. For more information, see the
Command Reference
DSim (DPL command language simulator) interprets Datamax™ data
streams without requiring any host programming changes. If you are
sending DPL label files to the printer, select DSim as your printer
command language. For more information, see the
Reference Manual.
Smart Printing refers to the ability of the printer to independently run
printing operations without being connected to a host computer. If
you are running printer-based applications written in C#, select Smart
Printing as your printer command language.
For help creating Smart Print applications, go to the Intermec
Developer Center at www.intermec.com/developer.
You can use one of these methods to change the printer command
language:
• Printer web page
• Main Menu
• PrintSet 5. For more information, see the PrintSet 5 online help.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Manual.
ZSim
DSim Command