Intermec PM23c User Manual page 44

Chapter 2 — Set Up the Printer
30
Route the Liner Around a Collapsible Core (PM43, PM43c)
7 Pull the liner tight and push the label dispenser lever back into the
closed position.
8 Turn the printhead liftlever clockwise to close the printhead.
9 Close the media cover.
10 Press the Print button to advance the media.
11 Configure the printer for the correct media type (media with gaps,
black mark, continuous fixed length, or continuous variable
length).
12 Calibrate the sensors on the printer. You can calibrate the media
from the Main Menu (Wizards > Calibration > Media) on a full
touch printer or from the web page (Services > Media
Calibration) for all models of the printer.
PM23c, PM43, and PM43c Mid-Range Printer User Manual