About Bluetooth Communications - Intermec PC23d User Manual

Chapter 3 — Connect the Printer

About Bluetooth Communications

82
Setting Description
Server Common Sets the certificate name that is on the
Name 1 primary authentication server. If this
value is none, then the value for Server
Common Name 2 is used. Range is 1 to 96
characters.
Server Common Sets the certificate name that is on the
Name 2 secondary authentication server. If this
value is none, then the value for Server
Common Name 1 is used. Range is 1 to 96
characters.
Validate Determines if the identity of the
Certificate authentication server is verified using its
certificate when using EAP-TTLS, PEAP,
or EAP-TLS. Intermec recommends that
you set Validate Certificate to Yes.
PAC Sets the name of the Protected Access
Credential (PAC) that is used for
EAP-FAST authentication. The printer
uses this file if Acquire PAC is on and the
current installed PAC fails to authenticate
the printer to the network.
Acquire PAC Determines if automatic PAC file
provisioning is on for EAP-FAST
authentication.
Fast Roaming Determines if the printer can roam from
(CCKM) one access point to another without
reauthenticating with the server. CCKM
only works in wireless networks using
LEAP.
Mixed Mode Determines if the printer can use either
(Group=TKIP) TKIP or AES for data encryption,
depending on the configuration of the
access point.
The printer supports Bluetooth communications when the optional
Wi-Fi/Bluetooth module is installed. When Bluetooth is enabled, you
can connect the printer to other Bluetooth devices, such as bar code
scanners and keyboards. You can also make the printer discoverable by
Bluetooth-enabled devices such as mobile computers.
PC23 and PC43 Desktop Printer User Manual
Default
None
None
No
eap-fast.pac
On
Disable
Disable