Install Authentication Certificates - Intermec PM23c User Manual

PM23c, PM43, and PM43c Mid-Range Printer User Manual

Install Authentication Certificates

If you are using Wireless 802.11 security, you may need to install
authentication certificates in the printer for the highest level of
security.
1 Make sure you have the printer configured for the correct date and
time.
2 On your PC, open an FTP connection to the IP address of the
printer.
3 Transfer your certificate to /home/user/certificates/public.
4 On your PC, open a Telnet session to the printer.
5 Change the directory to: /home/user/certificates/public.
6 Type this command:ls -la.
You should see the certificate that you transferred in Step 3.
7 Use the certinstall script to install the certificate using this format:
<prompt> certinstall.sh <certificate name>
Example:
itadmin@PM23-00000000073 /home/user/certificates/public$
certinstall.sh entrust.cer
8 When you receive confirmation that the certificate was installed,
type this command to make sure you see a .pem file and another
soft link to the same file: ls -la.
9 Use the printer web page, the Main Menu on a full touch printer, or
PrintSet 5 to specify the certificate .pem file to use for security.
Chapter 3 — Connect the Printer
53