Load Ribbon - Intermec PM23c User Manual

Chapter 2 — Set Up the Printer

Load Ribbon

36
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the
printhead.
3 Slide the ribbon roll onto the ribbon supply hub and slide the
empty ribbon core onto the ribbon takeup hub.
4 For ribbon that has the ink wound out, place the ribbon on the
supply hub with the ribbon wound clockwise. For ribbon that has
the ink wound in, place the ribbon on the supply hub with the
ribbon wound counterclockwise.
PM23c, PM43, and PM43c Mid-Range Printer User Manual