Media Settings - Intermec PM23c User Manual

Media Settings

Media Settings
Setting
Media Type
Print Method
Media Margin (X)
PM23c, PM43, and PM43c Mid-Range Printer User Manual
This section describes media settings for the printer. To view these
settings:
• From the printer Main Menu, select Settings > Printing > Media.
• From the printer web page, click the Configure tab, Printing >
Media.
Note: If you are using an icon printer that is not on a network, you
need to use PrintSet 5 through a USB connection to configure media
settings.
Description
Selects the type of media that is loaded in the printer.
Selects the method of printing that the printer is using. Ribbon (TTR) for
Sets the width of the margin from the left edge of the
label along the printhead to the edge of the printable
area. Unit of measurement is defined in the Unit of
Measurement parameter.
*935-044-001*
INTERMEC
6001 36th Ave W
Appendix B — Default Settings
Default
Media With Gaps
thermal transfer
printers, or No
Ribbon (DT) for
direct thermal
printers
Variable
137