Intermec PM23c User Manual page 152

Appendix B — Default Settings
Media Settings (Continued)
Setting
Media Width
Media Length
Clip Default
138
Description
Sets the width of the printable area measured from the
media margin (X) across the printhead. Unit of
measurement is defined in the Unit of Measure
parameter.
*935-044-001*
INTERMEC
6001 36th Ave W
Everett WA 98203
Sets the length of the printable area measured from one
edge of the label to the edge that is closest to the
printhead. Unit of measurement is defined in the Unit
of Measurement parameter.
*935-044-001*
INTERMEC
6001 36th Ave W
Everett WA 98203
Determines if the printer prints items outside the
printable area of the label.
When this is set to Off, the printer returns an error if
any part of a bar code label cannot be printed because
that part extends beyond the printable area. When this
is set to On, the printer prints all bar code labels, but
may also print unreadable, incomplete labels.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
Variable
Variable
Off