How to Adjust the Printer
Prevent Ribbon Wrinkling
PM23c, PM43, and PM43c Mid-Range Printer User Manual
6 Insert the new platen roller into the printer and secure it by turning
the latch counterclockwise.
7 Reload media and turn the printhead lift lever clockwise to lower it.
8 Close the media cover, reconnect power, and turn on the printer.
You may need to adjust your printer to accommodate how you are
printing or to improve printer performance. You can make these
adjustments on the printer:
•
Ribbon wrinkling
•
Printhead balance
•
Printhead pressure
•
Label taken sensor
•
Label gap sensor and label mark sensor
If you have problems with the thermal transfer ribbon getting
wrinkled, try adjusting the ribbon tension bar.
1 Open the media cover.
Chapter 6 — Maintain the Printer
107