Install A Configuration File From A Usb Storage Device - Intermec PM23c User Manual

Install a Configuration File from a USB Storage
Device
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Programming Commands to Load a Printer Profile
Connection Programming Commands
Printer running RUN "/system/usr/bin/cfg -o xmlimportset -k
Fingerprint /home/user/profiles/myprofile"
Printer running <STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset -k
IPL /home/user/profiles/myprofile<ETX>
Telnet connection /system/usr/bin/cfg -o xmlimportset -k
over Port 23 /home/user/profiles/myprofile
After you save an .xml configuration file to a USB storage device, you
can install it on the printer at any time.
Note: If there is more than one configuration file on the USB storage
device, the printer imports the first file found in alphabetical order by
file name.
1 Insert the USB storage device in the printer USB host port.
2 From the Ready screen, press the Main Menu button. The Main
Menu appears.
3 Select Tools > USB Menu.
4 Select Configuration.
5 Select Install Configuration. The printer imports the
configuration file:
For most printer languages, the configuration file is imported
•
directly into the working configuration and is not copied to the
/config directory.
An IPL configuration file is copied to /home/user/config/ipl.
•
6 Press OK when the confirming message appears.
Chapter 4 — Configure the Printer
81