Ethernet Settings - Intermec PM23c User Manual

Serial Port Settings (Continued)
Setting
New Line Character Defines the characters that the printer echoes to the host to

Ethernet Settings

Ethernet Settings
Setting
(IPv4) IP Assignment
Method
(IPv4) IP Address
Subnet Mask
Default Router
DHCP Response
(IPv6) IP Assignment
Method
(IPv6) IP Address
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Description
indicate that it has moved to a new line.
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
• From the printer Main Menu, select Settings > Communications
> Ethernet.
• From the printer web page, click the Configure tab,
Communications > Ethernet.
Description
Specifies how the printer obtains an IP address.
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network.
Specifies the IP address of a router that is used
when a device sends a packet to another subnet or
to an unknown destination.
Specifies if the printer receives DHCP responses by
broadcast or unicast.
Specifies how the printer obtains an IP address (for
IPv6 networks).
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
Appendix B — Default Settings
Default
CR/LF
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
131