About Printer Command Languages - Intermec PM23c User Manual

Chapter 1 — About the Printer

About Printer Command Languages

16
Communications Wizards
Wizard
Line Analyzer
Wireless 802.11
Bluetooth
Calibration Wizards
Wizard
Media
Screen
RFID
Label Taken Sensor
A printer command language is a set of instructions that controls
printer functions:
• Configure the printer.
• Return the status of the printer.
• Control peripheral devices.
Format a label or receipt for printing.
•
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Description
Logs all incoming data on all communications
channels and saves the data to a log file. For
experienced users.
Looks for wireless networks and sets up Wi-Fi
communications. Available when Wi-Fi/Bluetooth
module is installed.
Looks for discoverable Bluetooth devices and sets
up Bluetooth communications. Available when
Wi-Fi/Bluetooth module is installed.
Description
Calibrates the label gap sensor and shows current
print settings.
Calibrates the touch screen.
Calibrates the optimal label adjustment and output
power setting for the RFID media loaded in the
printer. Available when the RFID module is
installed.
Calibrates the label taken sensor used with the label
dispenser. Available when the label taken sensor is
installed.