Setting Up The Printer For Wireless Communications Using Printset; Configuring The Printer Settings - Intermec UVE 10 PB21 User Manual

Chapter 2 — Configuring the PB21 and PB31
Setting Up the Printer for Wireless Communications
Using PrintSet
Use the PrintSet configuratio application to set up wireless
communications on your printer.
To set up the printer for wireless communications using PrintSet
2 On your PC, start PrintSet.
3 Select your printer from the My Printers list.
4 In the Printer Tasks list, click Wireless Setup Wizard.
5 If prompted, type your username and password. The default
6 Click Next.
7 Follow the instructions to configure 802.11 radio

Configuring the Printer Settings

You can change the printer configuration settings from:
•
•
•
•
•
For more information about the IPL and Fingerprint menu systems,
see
34
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
1 Connect the printer to your PC using PrintSet. For help, see
connect the printer to a PC through the serial port using
PrintSet" on page
username is admin and the default password is pass.
communications and security.
the display.
the host PC using PrintSet.
the host PC using the command line.
the printer home page.
SmartSystems .
TM
"IPL and Fingerprint Setup Menus" on page
V10 CONSUMIBLES S.L.
29.
PB21 and PB31 Mobile Receipt Printer User Guide
"To
75.