Appendix B — Default Settings
Display and Audio Settings (Continued)
Setting
Menu Access
PIN
Screen Timeout
Feed Key Access
Volume
System I/O Settings
System I/O Settings
Setting
Wireless 802.11
Bluetooth
RFID
Virtual COM
142
Description
Determines if the Menu button on the printer web
page is accessible.
Sets the password that allows access to the Menu
button on the printer web page, if the Menu Access
parameter is set to Enable With PIN. Range is 4 to 16
characters.
Selects how long the printer screen stays on before the
screen saver starts.
Determines if the Feed button on the printer keypad
is enabled or disabled.
Sets the printer volume.
This section describes system I/O settings for the printer. To view these
settings:
•
From the printer Main Menu, select Settings > System Settings >
Manage I/O.
•
From the printer web page, click the Configure tab, System
Settings > Manage I/O.
Description
Determines if the printer is allowed to communicate using
its 802.11 radio. Supported only if the optional
Wi-Fi+Bluetooth module is installed.
Determines if the printer is allowed to communicate using
its Bluetooth radio. Supported only if the optional
Wi-Fi+Bluetooth module is installed.
Determines if the printer is allowed to communicate using
its RFID radio. Supported only if the RFID module is
installed.
Determines if you can enable the USB port to be used as a
virtual serial port. When you change this setting, you must
restart the printer to enable the new setting.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
Enable
1234
Disable
Enable
Off
Default
Enable
Enable
Enable
Disable