Configuring Authentication Server Settings For Smb; Configuring Authentication Server Settings For Ldap - Xerox ColorQube 8700 System Administrator Manual

Configuring Authentication Server Settings for NDS (Novell)
Before you begin:
Enable and configure Netware settings. For details, see
®
1. On the Xerox Access Setup page, click Edit next to Authentication Servers.
2. Under Authentication Type, select NDS (Novell).
Click Add New.
3.
4. Under Default Tree/Context, type the details in the Tree and Context fields.
Click Save Server.
5.
6. To specify server settings for an alternate authentication server, click Add New.
7. To copy the settings from another server, select a server from the list and click Copy From.
Click Edit to update the settings.
8.

Configuring Authentication Server Settings for SMB

®
1. On the Xerox Access Setup page, click Edit next to Authentication Servers.
Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).
2.
3. Click Add New.
4. Under Domain, type the domain name of your authentication server.
If you want to specify domain controller IP addresses or host names, select Optional Information.
5.
Address options appear.
Select the address type. Options are IPv4 Address, or Host Name.
6.
7. Type the appropriately formatted address and port number. The default port number is 137.
8. Click Save Server.
To specify server settings for an alternate authentication server, click Add New.
9.
10. To copy the settings from another server, select a server from the list and click Copy From.
11. Click Edit to update the settings.

Configuring Authentication Server Settings for LDAP

®
1. On the Xerox Access Setup page, click Edit next to Authentication Servers.
2. Under Authentication Type, select LDAP.
Click Add New.
3.
4. Configure LDAP server settings and click Apply.
To configure LDAP settings for a previously added LDAP server, click Edit next to the LDAP server in
5.
the list.
A book icon appears in the list next to the LDAP server that is used for Network Address Book queries.
6. To specify server settings for an alternate authentication server, click Add New.
7. To copy the settings from another server, select a server from the list and click Copy From.
Click Edit to update the settings.
8.
NetWare on page 25.
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Security
63