Smb Filing; Configuring Kerberos Authentication Options For Smb - Xerox ColorQube 8700 System Administrator Manual

SMB Filing

You can specify Kerberos authentication options for features that file images to an SMB-shared network
location.

Configuring Kerberos Authentication Options for SMB

1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click SMB Filing.
3. Under With Kerberos Tickets, for Workflow Scanning, Server Fax, and Scan to Home features, select
an option:

Always File with Kerberos Ticket instructs the printer to attempt to use Kerberos
authentication to the SMB shared network location. Configure Network Authentication or Smart
Card Authentication using a Kerberos server.

Prefer Filing with Kerberos Ticket instructs the printer to authenticate to the SMB shared
network location with a Kerberos ticket if available. If a Kerberos ticket is not available, or
Kerberos authentication fails, the printer attempts to authenticate using other methods, such as
NT, or NTLM.

Do Not File with Kerberos Ticket instructs the printer to attempt to authenticate to the SMB
shared network location using other methods, such as NT, or NTLM. Do not select this option
when Smart Card authentication is enabled. If you select this option when Smart Card
authentication is enabled, SMB file transmission fails, and an error message appears on the
touch screen.
4. Under Without Kerberos Tickets, click the appropriate link to navigate to the configuration page for
features that use SMB as needed. Features listed use SMB, but cannot use Kerberos authentication.
Disable these features or configure them to use a protocol other than SMB for FIPS 140 compliance.
Click Apply.
5.
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Network Configuration
43