Usb Port Security; Enabling Or Disabling Usb Ports - Xerox ColorQube 8700 System Administrator Manual

Security

USB Port Security

You can prevent unauthorized access to the printer through USB ports by disabling the ports. There are
three USB ports. One is in the front, and two are in the back of the printer.

Enabling or Disabling USB Ports

1. In CentreWare Internet Services, click Properties > Security.
2. Click USB Port Security.
3. To enable the front USB port, next to Front USB Port, select Enabled. To disable the port, clear the
check box.
4. To enable the rear two USB ports, next to Rear USB Ports (Pair), select Enabled. To disable the ports,
clear the check box.
Click Apply.
5.
Notes:

If USB ports are disabled, you cannot use a USB card reader for authentication, update the
software, or print from a USB Flash Drive.

If your printer model has a cover for the USB port on the control panel, you can install or
remove the cover. You can find the installation instructions and the necessary part in the
compartment inside of Tray 1.

The USB Port settings do not affect the rear Type B port.
102 ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide