Xerox ColorQube 8700 System Administrator Manual page 37

Adding or Editing an IPX Trap Destination Address
1. On the Advanced Settings page, click Add IPX Address, or select an existing address and click Edit.
2. Type the 8-digit hexadecimal number that identifies the IPX External Network host configured to
receive the trap.
3. Type the 48-bit Physical MAC Address of the computer running the SMNP manager application
receiving the trap.
4. Type the IPX Socket Number of the computer running the SNMP manager application configured to
receive the packets. The default IPX Socket Number is 9010.
5. Select the SNMP Version.
6. Select the type of traps that the SNMP manager receives under Traps to be Received.
Click Save to apply the new settings or Undo to retain the previous settings.
7.
Click Cancel to return to the previous page.
8.
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Network Configuration
37