Initial Setup At The Control Panel; Installation Wizard; Quick Setup Home; Configuration Report - Xerox ColorQube 8700 System Administrator Manual

Initial Setup at the Control Panel

Installation Wizard

The Installation wizard starts the first time you turn on the printer. The wizard prompts you with a series
of questions to help you configure basic printer settings.
Note: You can change these settings at any time.

Quick Setup Home

After the Installation wizard completes, the Quick Setup Home wizard appears. Use the Quick Setup
Home wizard to configure printer settings.
Note: You can complete the wizard at any time.

Use the IP Address Settings wizard to assign a static IP address or change the default dynamic
addressing settings.

Use the Contact Numbers wizard to type phone numbers for support or supplies.

Use the Fax Setup wizard to configure basic embedded fax settings.
After the Quick Setup Home wizard completes, the printer restarts and a Configuration Report
automatically prints.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > Quick Setup Home.
3. To start a wizard, touch IP Address Settings, Contact Numbers, or Fax Setup.
4. Follow the onscreen instructions.
Note: Not all options listed are supported on all printers. Some options apply only to specific printer
models or configurations.

Configuration Report

The Configuration Report lists all current settings of the printer. A configuration report prints at startup by
default.
In CentreWare Internet Services, click Status > Configuration Report.
1.
2. To print the report, click Print Configuration Page.
To turn off automatic printing of a Configuration Report at startup, see
Report at Startup on page 18.
Disabling the Configuration
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Initial Setup
17