Physically Connecting The Printer - Xerox ColorQube 8700 System Administrator Manual
Color multifunction printer
Hide thumbs
Also See for ColorQube 8700:
- Service manual (88 pages) ,
- Software upgrade (36 pages) ,
- Reference manual (28 pages)
Table of Contents
Advertisement
Initial Setup
Physically Connecting the Printer
1.
Connect the power cord to the printer, and plug it into an electrical outlet.
2.
Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3.
If your printer has fax installed, connect it to a correctly configured telephone line.
4.
Turn on the printer.
16
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Hide quick links:
Advertisement
Table of Contents
