System Timeout; Setting System Timeout Values; Setting The System Timeout Values At The Control Panel - Xerox ColorQube 8700 System Administrator Manual

Security

System Timeout

You can specify how long the printer waits to log out an inactive user at the control panel.

Setting System Timeout Values

1. In CentreWare Internet Services, click Properties > Security.
2. Click System Timeout.
3. Under Web System Timer, type the inactive time from 6–6000 minutes, that the printer waits before
it logs a user out of CentreWare Internet Services.
4. Under Touch User Interface System Timer, type the time that the printer waits before it logs a user
out of the touch screen. Type the time, from 0–60 minutes, and select the time in seconds.
5. Under Warning Screen, select Enabled to require the printer to display a warning message before it
logs a user out of the touch screen.
6. Click Apply to save the new settings or Undo to retain the previous settings.

Setting the System Timeout Values at the Control Panel

1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Device Settings > Timers > System Timeout.
3. Specify the time the printer waits to log out an inactive user at the control panel. Next to Timeout
(Mins), and Timeout (Secs), touch the arrows.
4. To instruct the printer to display a warning message before it logs a user out of the touch screen,
under Warning Screen, touch Enabled.
Touch Save.
5.
96 ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide