Postscript Passwords; Enabling Or Creating Postscript Passwords - Xerox ColorQube 8700 System Administrator Manual

PostScript Passwords

The PostScript language includes commands that allow PostScript print jobs to change the printer
configuration. By default, PostScript jobs can use these commands, and a password is not required. To
ensure that unauthorized changes are not made, you can require PostScript jobs to include a password.
You can enable the following passwords:

Run Start Job: This password controls the execution of the Sys/Start file.

System Parameters Password: Use this password to control the execution of PostScript programs
that modify PostScript system parameters.

Start Job Password: The Start Job password, used with the Startjob and Exitserver operators,
restricts PostScript jobs from running unencapsulated to prevent them from changing default printer
settings.
For details, see the Help in CentreWare Internet Services.
1. Under StartupMode, select Enabled to enable the Run Start job password.
2. Under System Parameters Password, type a password.
3. Retype the password to verify.
4. Under Job Start Password, type a password.
5. Retype the password to verify.
6. Click Apply to save the new settings or Cancel to return to the previous screen.

Enabling or Creating PostScript Passwords

1. In CentreWare Internet Services, click Properties > Security.
2. Click PostScript Passwords.
3. Under StartupMode, select Enabled to enable the Run Start job password.
4. Under System Parameters Password, type a password.
5. Retype the password to verify.
6. Under Job Start Password, type a password.
7. Retype the password to verify.
8. Click Apply to save the new settings or Cancel to return to the previous screen.
ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide
Security
101