Enabling Tcp/Ip; Configuring Tcp/Ip Settings At The Control Panel - Xerox ColorQube 8700 System Administrator Manual

Network Configuration
IP
Internet Protocol (IP) is a protocol within the Internet Protocol Suite that manages the transmission of
messages from computer to computer.

Enabling TCP/IP

1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Network Settings > TCP/IP Settings.
3. Touch TCPIP Enablement.
4. Touch Enable for IPv4 or IPv6, then touch Save.
Note: By default, TCP/IP is enabled. If you disable TCP/IP, enable it at the printer control panel before
you access CentreWare Internet Services.

Configuring TCP/IP Settings at the Control Panel

Manually Configuring the Network Address
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Network Settings > TCP/IP Settings.
Touch Dynamic Addressing.
3.
4. Touch Disabled, then touch Save.
5. Touch IP Address/Host Name.
6. Touch the field under IPv4 Address, then type the static IP address using the touch screen keypad.
7. Touch the field under Host Name, then type the host name.
Touch Save, then touch Close.
8.
9. Touch Subnet and Gateway.
10. Touch Subnet Mask, then type the subnet mask address using the touch screen keypad.
11. Touch Save.
12. Touch IP Gateway, type the gateway address using the touch screen keypad, then touch Save.
Configuring Dynamic Address Settings
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools > Network Settings > TCP/IP Settings.
3. Touch Dynamic Addressing.
4. Touch DHCP, then touch Save.
28 ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide