Ntp - Xerox ColorQube 8700 System Administrator Manual

Network Configuration

NTP

The Network Time Protocol (NTP) synchronizes the internal clocks of computers over a network
connection at system startup and every subsequent 24-hour period thereafter. If your printer uses DHCP
and an NTP server, or if a DHCP server provides Greenwich Mean Time (GMT) offset, these settings are
ignored.
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols.
2. Click NTP.
3. Under Network Time Protocol, select Enabled to enable the protocol.
4. Select the address type. Options are IPv4 Address or Host Name.
5. Type the appropriately formatted address and port numbers for IP Address: Port and Alternate IP
Address: Port. The default port number is 123.
Click Apply to save the new settings or Undo to retain the previous settings.
6.
Note: Restart your printer for the new settings to take effect.
54 ColorQube 8700/8900 Color Multifunction Printer
System Administrator Guide