Configuring Authentication Server Settings For Smb; Configuring Authentication Server Settings For Ldap - Xerox WorkCentre 6400S System Administrator Manual
Color multifunction printer
Hide thumbs
Also See for WorkCentre 6400S:
- Quick use manual (17 pages) ,
- Quick manual (8 pages) ,
- Specifications (8 pages)
Table of Contents
Advertisement
Security
Configuring Authentication Server Settings for SMB
Note:
If your printer is locked, you must log in as a system administrator. For details, see
CentreWare IS
on page 17.
On the Authentication Configuration page, click Configure next to Authentication Server.
1.
Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).
2.
Under Default Domain, type the domain name of your authentication server.
3.
If you want to specify domain controller IP addresses or host names, select Optional
4.
Information.
Note:
Address options do not display unless you have selected Optional Information.
Select the address type. Options are IPv4 Address, or Host Name.
5.
6.
Type the appropriately formatted address and port number. The default port number is 137.
7.
To specify any alternate domains and controllers, type the IP addresses, host names, domains,
and port numbers in the Alternate Domains (Optional) fields.
Click Save.
8.
Configuring Authentication Server Settings for NDS (Novell)
Notes:
•
If your printer is locked, you must log in as a system administrator. For details, see
Accessing CentreWare IS
•
Netware must be enabled. For details, see
1.
On the Authentication Configuration page, click Configure next to Authentication Server.
2.
Under Authentication Type, select NDS (Novell).
3.
Under Default Tree/Context (Required), type the details in the NDS Tree and NDS Context
fields.
4.
Under Alternate Tree/Context (Optional), type the details in the NDS Tree and NDS Context
fields, if required.
5.
Click Save.
Configuring Authentication Server Settings for LDAP
Note:
If your printer is locked, you must log in as a system administrator. For details, see
CentreWare IS
on page 17.
1.
On the Authentication Configuration page, click Configure next to Authentication Server.
2.
Under Authentication Type, select LDAP.
3.
To configure LDAP settings, click LDAP Settings. For more details, see
58
WorkCentre 6400 Multifunction Printer
System Administrator Guide
on page 17.
NetWare
on page 47.
LDAP
on page 37.
Accessing
Accessing
Advertisement
Table of Contents
Troubleshooting
