Communication—Stop Bit - Panasonic KX-TDA200 Programming Manual

13.1 [11-1] Main
Notice
Do not use the following combinations:
•
Word Length: 8 bit, Parity Bit: Space, Stop Bit: 1 bit
•
Word Length: 8 bit, Parity Bit: Mark, Stop Bit: 2 bit
•
Word Length: 8 bit, Parity Bit: Space, Stop Bit: 2 bit
Default
8 bit
Value Range
7 bit, 8 bit
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
16.1.1 SMDR (Station Message Detail Recording)
Communication—Flow
Enables the hardware flow control.
Default
None
Value Range
None, Hardware
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
None
Communication—Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal computer.
764 PC Programming Manual Document Version 2008-11