4-2-1] Portable Station-Extension Settings-Clip Generate - Panasonic KX-TDA200 Programming Manual

6.11 [4-2-1] Portable Station—Extension Settings—CLIP Generate
6.11 [4-2-1] Portable Station—Extension Settings—
CLIP Generate
CLIP Generate allows the CLIP numbers for a set of locations in series to be programmed together.
Pre-assigned CLIP numbers for those locations will be overwritten.
If a number generated here is longer than 16 digits, the additional digits will be discarded.
Location Entry—Beginning Entry Location (Ext. Number)
Specifies the extension number of the first location to be programmed.
Default
Not stored.
Value Range
PS extension number
Maintenance Console Location
6.11 [4-2-1] Portable Station—Extension Settings—CLIP Generate
Programming Manual References
6.10 [4-2-1] Portable Station—Extension Settings
Feature Manual References
3.1.13 CLIP (Calling Line Identification Presentation)
Location Entry—Number to Generate
Specifies the number of locations to be programmed.
A CLIP number will only be assigned to registered PS extensions, even if the number entered here is larger
than the total number of PS extensions.
Default
1
Value Range
1–total number of connected wired extensions
Maintenance Console Location
6.11 [4-2-1] Portable Station—Extension Settings—CLIP Generate
Programming Manual References
6.10 [4-2-1] Portable Station—Extension Settings
594 PC Programming Manual Document Version 2008-11