3-1-4] Dialing Plan - Panasonic KX-TDA200 Programming Manual

5.4 [3-1-4] Dialing Plan

The PBX sends all of the dialed digits at once after an extension user completes dialing. The PBX can recognize
the end of dialing when the dialed telephone number starts with the programmed leading number and contains
the programmed total number of digits.
When the PBX recognizes the end of dialing to an analog CO line, the PBX cancels the muting of the caller's
voice sent to the analog CO line immediately. If the PBX cannot recognize the end of dialing, the PBX mutes
the caller's voice sent to an analog CO line from the time at which the last digit is dialed until the analog CO
line inter-digit timer expires.
4 tables can be programmed, each with a maximum of 50 leading numbers. Select the table to program from
the Dialing Plan Table list.
To assign a set of leading numbers automatically, click Auto Assign.
Leading Number
Specifies the leading number to be regarded as the beginning of dialing.
Default
No. 1 in Dialing Plan Table 1: N11
No. 2 in Dialing Plan Table 1: NXX NXX XXXX
No. 3 in Dialing Plan Table 1: 1NXX NXX XXXX
Others: Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, N [2,3,4,5,6,7,8,9], P [0, 1], and X [0-9, *, and #])
Maintenance Console Location
5.4 [3-1-4] Dialing Plan
Programming Manual References
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
5.1 [3-1-1] Trunk Group—TRG Settings—Main—
or later)
Feature Manual References
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Removed Number of Digits
Specifies the number of leading digits of the dialed number to be removed.
Default
0
Value Range
0–15
Document Version 2008-11
Dial—Analog CO First Digit
Dial—Analog CO Inter-digit
Dialing Plan Table (MPR Software File Version 4.0000
5.4 [3-1-4] Dialing Plan
PC Programming Manual 391