Panasonic KX-TDA200 Programming Manual page 115

Value Range
DTMF, Pulse
Maintenance Console Location
3.11 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
4.1.2 Dial Mode Selection
CPC Signal Detection Time—Outgoing, Incoming
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO line calls
before disconnecting the line. When None is selected here, the line will not be disconnected when a CPC
signal is not detected.
Default
400 ms
Value Range
None, 6.5 ms, 8 ´ n (n=1–112) ms
Maintenance Console Location
3.11 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
3.1.20 CPC (Calling Party Control) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
Value Range
80 ms, 160 ms
Document Version 2008-11
3.11 [1-1] Slot—Port Property - LCO Port
PC Programming Manual 115