Section 4 Web User Interface Programming
Timer for Dial Plan
Description
Value Range
Default Value
Configuration File Reference
International Call Prefix
Description
Value Range
Default Value
Configuration File Reference
Country Calling Code
Description
Value Range
Default Value
Configuration File Reference
National Access Code
Description
Value Range
Default Value
Configuration File Reference
Default Line for Outgoing
Description
Value Range
Default Value
90
Administrator Guide
Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
1–15
5
MACRODIGIT_TIM (Page 141)
Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Max. 8 characters
Not stored.
INTERNATIONAL_ACCESS_CODE (Page 141)
Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Max. 8 characters
Not stored.
COUNTRY_CALLING_CODE (Page 142)
When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Max. 8 characters
Not stored.
NATIONAL_ACCESS_CODE (Page 142)
Specifies the line used to make an outgoing call when no line is
specified in the dialing operation.
1–6
1
Document Version 2011-11