Panasonic KX-TDA200 Programming Manual page 654

7.3 [5-3-1] Voice Message—DISA System
CO-CO with DISA—Fwd/Transfer to Private Network
Enables CO-to-TIE line calls to be established using DISA.
Default
Disable
Value Range
Disable: CO-to-TIE line calls are established without using DISA.
Enable (Get DISA): CO-to-TIE line calls are established using DISA, and DISA can be used to detect the end
of the call.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
7.3 [5-3-1] Voice Message—DISA System—Option 1—
Feature Manual References
None
CO-CO with DISA—Transfer by DTMF "#" (Optional SD Card Required)
Specifies whether an outside party such as a cellular phone can transfer a CO line call to an extension within
the PBX by dialing "#" + extension number.
Default
Disable
Value Range
Disable: "#" is ignored if dialed.
Enable (as "Flash"): The current CO line call will be placed on hold, then transferred to the extension whose
number is entered.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
CO-CO with DISA—Return to DISA Top Menu by DTMF "*"
Enables a CO line caller to return to the DISA top menu by pressing " " while hearing a ringback, reorder, or
busy tone. If disabled, retrying the call is possible by pressing " ".
654 PC Programming Manual
CO-CO with DISA—DISA to Private Network
Document Version 2008-11