1-4] Clock Priority (Kx-Tda100/Kx-Tda200/Kx-Tda600) - Panasonic KX-TDA200 Programming Manual

3.36 [1-4] Clock Priority (KX-TDA100/KX-TDA200/
KX-TDA600)
Slot Number (KX-TDA100/KX-TDA200), Shelf-Slot Number (KX-TDA600)
Selects and prioritizes slot numbers for the PRI and T1 cards that are used to forward a clock pulse from an
external source to the PBX.
Obtain the master clock time from the outside line that the telephone company provides.
To change Clock Priority, follow the steps below:
1.
Assign a Clock Priority to each PRI and/or T1 card.
2.
Set the status of the present clock source card to "OUS", then "INS".
Note
If multiple PBXs are used to establish a private network (TIE line service, QSIG network, etc.) without being
connected through the telephone company, assign only one PBX as the clock source on the network. That
PBX should have a card connected to a telephone company line selected as its clock source. All other
PBXs should have cards connected to the network selected as the clock source. This enables all PBXs on
the network to synchronize their timing.
Default
None
Value Range
None, PRI23, T1
Maintenance Console Location

3.36 [1-4] Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)

Programming Manual References
Section 11 [9] Private Network
Feature Manual References
None
Document Version 2008-11
3.36 [1-4] Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
PC Programming Manual 235