Panasonic KX-TDA200 Programming Manual page 13

Document Version 2008-11
1.2.1 Installing and Starting the Maintenance Console
1. Connect the PC to the PBX with a USB cable.
2. Start Maintenance Console from the Start menu.
3. "Information before programming" appears.
a.
Carefully read this important additional information,
which includes updates to this and other manuals.
b.
Click OK to close this window.
4. Enter the Installer Level Programmer Code (default:
INSTALLER).
The Programmer Code authorizes different programming
levels, and the Quick Setup is only available when you start
the Maintenance Console with the Installer Level
Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorization: Administrator Level (default: ADMIN),
and User Level (default: USER). (® 1.2.2 Password
Security)
5. Click Connect.
6. Select your PBX model from PBX Model.
7. a.
Select the USB tab.
b.
Enter the system password for installer (default: 1234).
c.
Click Connect.
Note
To connect to the PBX via USB, the KX-TDA USB driver
must be installed on the PC, as explained above
in "Installing the Maintenance Console".
8. Follow the instructions of the Quick Setup wizard and
assign the basic items.
The system menu appears. You may now begin
programming the PBX.
PC Programming Manual 13