Utility-System Reset-Reset By The Command - Panasonic KX-TDA200 Programming Manual

2.6.17 Utility—System Reset—Reset by the Command
It is recommended to set the timed update to take place during the least active time period, for example late
at night.
Cards are automatically set to OUS status during an update, and returned to INS status when the update is
complete.
This utility does not apply to CS programs. These must be updated manually using the SD Card File View
and Load utility (see 2.6.4 Utility—SD Card File View and Load).
When this utility has been set, all commands that would affect the status of cards are prevented from operating.
The list of these commands is as follows:
•
Card status change (INS/OUS)
•
Diagnosis commands
•
Card installation
•
Card deletion
•
Remote reset
•
LPR program download requests
•
Signaling Bit Monitor requests (T1)
•
Line trace start requests (T1)
•
ISDN/QSIG Protocol Data Trace start requests
•
Time setting
•
CS program download requests
•
File deletion
When a function other than those listed above, that cannot be performed while Timed Update has been set,
is selected, an error message will be displayed.
To turn this utility on:
1.
From the Utility menu, select Timed Update.
2.
Select the Set option.
The time setting box will become available.
3.
Enter the desired time using the number keys.
Click in the hour or minute field and use the up and down arrows to adjust the displayed time in increments
of one unit.
4.
Click Apply.
A message box will be displayed.
5.
Click Yes.
To turn this utility off:
1.
From the Utility menu, select Timed Update.
2.
Select the Off (Cancel) option.
3.
Click Apply.
A message box will be displayed.
4.
Click Yes.
2.6.17 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD memory
card, and resets the connected PBX.
This option is only available at Installer level.
2 copies of each of the main system files can be stored on the SD memory card. The names of these files are
as follows:
56 PC Programming Manual Document Version 2008-11