3.21 [1-1] Slot—Port Property - IP-GW Port—
Connection Command
Commands for the IP-GW ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.21 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Programming Manual References
3.20 [1-1] Slot—Port Property - IP-GW Port
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
3.21 [1-1] Slot—Port Property - IP-GW Port—Connection Command
Programming Manual References
3.20 [1-1] Slot—Port Property - IP-GW Port
Feature Manual References
None
Document Version 2008-11
3.21 [1-1] Slot—Port Property - IP-GW Port—Connection Command
PC Programming Manual
189