Panasonic KX-TDA200 Programming Manual page 108

3.10 [1-1] Slot—Card Property - LCO type
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial.
Pulse % Break on this screen determines the value that can be specified here.
Default
32 ms
Value Range
4 ´ n (n=4–18) ms
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
3.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
High Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a high speed pulse dial.
% Break on this screen determines the value that can be specified here.
Default
20 ms
Value Range
4 ´ n (n=3–15) ms
Maintenance Console Location
3.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
3.11 [1-1] Slot—Port Property - LCO Port
Feature Manual References
None
Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
Default
Normal
108 PC Programming Manual
High Speed Pulse Dial—
High Speed Pulse Dial—Pulse
Document Version 2008-11