Utility-Cs Information - Panasonic KX-TDA200 Programming Manual

2.6.14 Utility—CS Information
Item
RTP Receive Abandoned Packet Counter
RTP Arrive Packet Interval (MAX.) [ms]
RTP Arrive Packet Interval (MIN.) [ms]
To view IP extension information
1.
From the Utility menu, select IP Extension Statistical Information.
2.
From the Card Selection drop-down list, select the slot number.
3.
Click Execute.
The statistical information will be displayed.
4.
Select an option:
•
Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Save.
•
Click Clear to erase the information and reset the Collection Started Time.
5.
Click Cancel to return to the main screen.
2.6.14 Utility—CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available at Installer level, and requires that the target CSIF, DHLC or DLC card be set to
INS status.
The displayed items are as follows:
Item
Shelf-Slot
Port
CS Name
Status
Version
Revision
CSID
Path
54 PC Programming Manual
Description
Number of the slot (for KX-TDA600, shelf and slot)
Number of the port
Name of the attached CS
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version number of the program file stored in the CS
Revision number of the program file stored in the CS
12-digit ID number of the CS
Number of the wireless extension currently using each path. In the case
of a group, several extensions may be using the same floating extension
number.
When an extension number is not registered, the display shows "OFF".
2.4 GHz PSs can use up to 3 paths (KX-TDA100/KX-TDA200/
KX-TDA600) or 2 paths (KX-TDA50). DECT PSs can use up to 4 paths
(KX-TDA100/KX-TDA200/KX-TDA600) or 2 paths (KX-TDA50). When
using high-density CSs, DECT PSs can use up to 8 paths.
Description
Total number of packets abandoned.
Maximum time taken for a packet to
arrive.
Minimum time taken for a packet to arrive.
Document Version 2008-11