Panasonic KX-TDA200 Programming Manual page 64

2.7.1 Frequently Asked Questions (FAQ)
Q I cannot change a feature number.
A •
It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
An extension
•
A Dial setting (see 11.1 [9-1] TIE Table)
•
Quick Dialing (see 4.9 [2-6-2] Numbering Plan—Quick Dial)
In any of these cases, choose another number.
Q How do I change the code used to access another PBX?
A •
Perform the following steps:
1.
Open the 4.8 [2-6-1] Numbering Plan—Main screen.
2.
Select the Other PBX Extension tab.
3.
Change the value in the
4.
Click Apply.
Q I cannot change an Other PBX Extension code.
•
A
It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
An extension
•
A Dial setting (see 11.1 [9-1] TIE Table)
•
Quick Dialing (see 4.9 [2-6-2] Numbering Plan—Quick Dial)
In any of these cases, choose another number.
Q I cannot change a feature number on the B/NA DND Call Feature screen.
A •
The number you are trying to store is already being used by another call feature.
Please choose a different number.
Q How do I prevent extension numbers being automatically assigned to a newly
installed card?
A •
Change
Extension Card in the 3.35 [1-3] Option screen from "Automatic" to "Manual".
Saving Modified Data
Q Modified settings have not been updated in the PBX.
A •
Click Apply or OK in the sub-menu screen.
Q Modified settings are not saved even when I press the Apply button.
•
A
To save the system data files, choose Save from the File menu.
Q If I reset the PBX directly after modifying settings, the modified settings are not
updated in the PBX.
64 PC Programming Manual
Dial cell of the desired feature.
New Card Installation—Automatic Extension Number Set for
Document Version 2008-11