PT Display—PT Last Display Duration in Idle Mode
Specifies the length of time that the current information remains on the display after the extension returns to
idle status.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Voice Mail (Caller from VM to CO)—On-hook Wait Time
Specifies the length of time from when the VPS seizes a CO line (for example, to transfer a call) until the VPS
goes on hook. If the time specified here is too short, the VPS will be unable to dial the number and make a
connection.
Default
10 s
Value Range
1–30 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
19.1.3 Voice Mail (VM) Group
During Conversation—DTMF Signal Length
Specifies the length of time that a DTMF signal is sent when a number is dialed from a PT or PS during a
conversation.
Document Version 2008-11
4.4 [2-3] Timers & Counters
PC Programming Manual
263