Panasonic KX-TDA200 Programming Manual page 67

A •
Class of Service feature restrictions can be set from the 4.11 [2-7-1] Class of Service
—COS Settings screen.
Q How do I restrict calls between 2 extensions?
A •
Calls between extensions can be restricted from the 4.13 [2-7-3] Class of Service—
Internal Call Block screen. Click in the relevant cells to select the COS levels whose
extensions are blocked from calling each other.
Q How do I restrict CO line calls made by extensions?
A •
CO line calls made by extensions can be restricted from the 4.12 [2-7-2] Class of
Service—External Call Block screen. Click in the relevant cells to select the CO line
groups that cannot be used by extensions associated with a particular COS in each
time mode.
To prevent extensions associated with a COS from making CO line calls, set all trunk
groups for that COS to "Block" (blue).
Q How do I modify the hold operation for SLTs?
A •
It is possible to choose how to hold a line and transfer a call with an SLT using the
SLT—SLT Hold Mode option on the 4.17 [2-9] System Options screen.
For more details, see "3.1.2 Call Hold" of the Feature Manual.
Q How do I set up an Incoming Call Distribution (ICD) group to receive CO line calls
directly?
A •
Perform the following steps:
1.
On the 5.12 [3-5-1] Incoming Call Distribution Group—Group Settings screen,
enter the floating extension number you chose for the ICD group in the
Extension Number cell.
2.
Click Apply.
3.
On the 5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—
Member List screen, select the ICD group you created from the Incoming Call
Distribution drop-down list.
4.
Enter the extension numbers of member extensions in the
Number column.
5.
Click Apply.
6.
On the DIL tab of the 12.2 [10-2] DIL Table & Port Settings screen, enter the
floating extension number of the ICD group as the
Lunch, Break, Night of each time mode.
7.
Modify other settings as required from the Group—Incoming Call Distribution
Group submenu.
Q How do I set the queuing operation for an Incoming Call Distribution group?
A •
Perform the following steps:
1.
On the 5.14 [3-5-2] Incoming Call Distribution Group—Queuing Time Table
screen, set the actions as required for each queuing table.
2.
On the 5.12 [3-5-1] Incoming Call Distribution Group—Group Settings screen,
from the Queuing Time Table tab, select the number of the Queuing Time Table
to use in each time mode.
Q How do I add an extension as a member of an Incoming Call Distribution (ICD) group?
Document Version 2008-11
2.7.1 Frequently Asked Questions (FAQ)
Floating
Extension
DIL Destination—Day,
PC Programming Manual 67