Holiday Service; Intercom Paging (Apt/Dpt Integration Only) - Panasonic KX-TVM50 Feature Manual

2.2.24 Holiday Service

Description
Allows the VPS to override the normal settings assigned for the appropriate trunk/port service by
playing a special holiday greeting. (Ex. "Happy New Year! Our office is closed today. If you wish to
record a message, please press 1 now".) A maximum of 20 holidays can be programmed. A holiday
can be a specific day or range of days.
Conditions
• Holidays cannot overlap.
Programming Manual References
2.4.2 Holiday Settings

2.2.25 Intercom Paging (APT/DPT Integration Only)

Description
Allows callers to page subscribers by PBX paging (there are different kinds of PBX paging, and these
can be specified by VPS programming) when the subscribers have set Intercom Paging for Call
Transfer or when the subscribers have set Intercom Paging for Incomplete Call Handling. The caller
is briefly placed on hold while the VPS announces the page and until the subscriber answers the
page. The subscriber can answer the page from any extension using the paging answer code; this
code is specified in the PBX User Manual. If Caller ID information is received and the caller's name
has been recorded for the Caller Name Announcement feature, the name will be announced at the
end of the page.
Conditions
• If the same telephone number is programmed for both the system and personal caller name
announcement, the VPS will announce the personal caller name.
• To utilise this feature, follow the procedure below.
1.
Open KX-TVM Maintenance Console. Click Class of Service, select a COS number to edit,
and click Edit COS.... In COS Parameters, select an Intercom Paging Group (1–32/All) in
"Intercom Paging Group (1–32/All)". If set to "All", the Intercom Paging feature is activated
for all.
2.
In KX-TVM Maintenance Console, click System Parameters and select Parameters in the
bottom of the screen. In Intercom Paging Parameters, adjust "No Answer Time for Intercom
Paging (1–30 s)" to your preference. For the Intercom Paging Group you selected in Step 1,
set the "Paging Code" for All Groups or the selected group.
Programming Manual References
"Intercom Paging Group" in 2.2.1 Class of Service
"Intercom Paging Parameters" in 2.5.4 Parameters
2.2 System Features
Feature Manual 27