Call Transfer Status - Panasonic KX-TVS75 Subscriber's Manual

4.1 Call Transfer Status

4.1 Call Transfer Status
Subscriber's
Main Command Menu
1 2
1
Covering
Call
Extension
Transfer
Status Setting
1 2
Call
Call
Blocking
Screening
1.
Log in to your mailbox to access the Main Command Menu.
2.
Press [4] for Automated Attendant Status.
To set Call Transfer Status, Press [1].
To set up Covering Extension, Press [2].
To set Message Reception Mode, Press [3].
To set Incomplete Handling Status, Press [4].
3.
Press [1] to set the Call Transfer Status.
The Current Call Transfer Status is (current status is stated).
To enable Call Blocking, Press [1].
To enable Call Screening, Press [2].
To enable Intercom Paging, Press [3].
To enable Beeper Access, Press [4].
To disable All Transfer Services, Press [5].
4.
Choose the option desired. Only one Call Transfer Status can be selected. A confirming
message will be played after the selection has been made.
- Blocks all incoming calls to your extension.
- Allows you to hear the caller's name before answering the call.
48
3 4 5
6
Automated
Attendant
Status
4
2 3
Message Incomplete
Reception Handling
Mode
Status
3 4 5
Intercom
Calling Disable
Paging All Transfer
a Beeper
Services
Call Blocking
Call Screening
This feature is used to specify how the VPS
should handle a call when a caller reaches
your extension. The following options are
available: Call Blocking, Call Screening,
Intercom Paging, Calling a Beeper, or
Disable All Transfer Services.
The Intercom Paging feature is
available
only if your company is using a
Panasonic KX-TD series telephone
system.
Special Features