Adjustment Of The Transfer Belt Due To Environmental Factors - Toshiba e-STUDIO2330C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

Adjustment of the transfer belt due to environmental factors

The length of the transfer belt may vary depending on environments such as temperature or humidity.

When the belt length varies, the leading position of an image also varies. Therefore, check image

position in the secondary scanning direction after installation or parts replacement because there is

difference between the environments of an installation site and a factory where the equipment was

shipped. (Although image adjustment is already performed at the shipment from the factory, this

adjustment must be performed again in the installation site.) If required, perform "Leading edge position

adjustment / Common items (05-408)".

SERVICE MANUAL "14.7.1 Adjustment of the transfer belt due to environmental factors"

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

Show Quick Links

Table of Contents